PORSCHE 924S REAR KIT
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1989-94 (includes uncategorized and accessory items)
This kit was designed to efficiently remove and install the wheel bearing and hub of spindle assemblies. Built-in self centering mechanism and incorporates a roller thrust bearing which lines up straight as an arrow during removal and reinstallation. These kits have a 20 year service history at thousands of repair shops. Every kit comes with a detailed instruction manual and does not require a hydraulic press. These kits are specific to the Porsche models listed.
( this is only for wheel bearings only) please call our office for availability.
General Fitment 911 1989-94 911 1994-98 911 1974-77 911 1978-83 911 1984-86 911 1987-89 944 1985-88 944 1989-91 968 1992-95 924 1986-88 BOXSTER 1997-04
Stoptech rear 13 inch 4 piston big brake kit Porsche 964 Carrera 91-94
Stoptech big brake kits give your vehicle that supercar look and feel, and exceed stock brake system performance in two areas. First, larger rotors increase heat capacity. A brake system?s biggest enemy is heat. A brake system with inadequate heat capacity will overheat leading to brake fade, increased stopping distances, and possible failure. Second, stiffer calipers and stainless steel lines reduce system compliance and increase initial bite and pedal feedback. The key is to increase heat capacity and reduce compliance without upsetting the stock front to rear brake torque ratio. If the brake upgrade you select adds too much front t...(choose a part on the right to read more)
General Fitment 911 1989-94
$2,694.60
Make a selection
Set contains: - brake pad set - screws for caliper - warning contacts - damping plates
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1989-94
Stoptech rear 13 inch 4 piston big brake kit Porsche 993 Carrera 93-98
Stoptech big brake kits give your vehicle that supercar look and feel, and exceed stock brake system performance in two areas. First, larger rotors increase heat capacity. A brake system?s biggest enemy is heat. A brake system with inadequate heat capacity will overheat leading to brake fade, increased stopping distances, and possible failure. Second, stiffer calipers and stainless steel lines reduce system compliance and increase initial bite and pedal feedback. The key is to increase heat capacity and reduce compliance without upsetting the stock front to rear brake torque ratio. If the brake upgrade you select adds too much front t...(choose a part on the right to read more)
General Fitment 911 1989-94 911 1994-98
$2,694.60
Make a selection
Includes:
(1) chrome lock housing
(1) chrome lock cylinder barrel
(1) 914 512 193 10
Known as: gasket set / gasket set comprising: piston boot / gasket set with protection cap $ 28 / gasket set / gasket set 28 mm $ / gasket set
View/Change Diagram
From $73.00
Make a selection
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
From $200.00
Make a selection
Features
• provides two eccentric mounting points
• used to adjust for increasing or decreasing wheelbase, and adjustable caster.
• a must-have for extended lower control arms (gt3 control arms or eccentric monoballs) to correct for unintended caster change
• compatible with all stock Porsche 996 and 997 lower control arms (including Porsche motorsport cup arms)
• complete set of 4 (2 front & 2 rear)
Like new
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Features
• connects the lower control arm to the subframe
• provides precision caster adjustability
• spacers included for setting stock or anti-squat and anti-dive configurations
• each kit includes pair of 2 links
• fits rear axle
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
• provides additional rear toe adjustment
• oem link is non-adjustable and eccentric bolt provides limited adjustment range, causing excessive tire wear and handling issues.
• helps maintain proper rear end suspension geometry
• each kit includes pair of 2 links
Features
• improved two piece 996 GT3 lower control arm design
• stronger than cast motorsport cup arms
• allows proper camber adjustment
• uses GT3 shims to adjust camber & lower control arm length (sold separately)
• high-strength steel alloy spherical bearings, completely serviceable unlike the motorsports arms
• sealed monoball inner bearing
• allows easy access to inner arm hardware
• includes adjustable thrust arm bushings to adjust caster and wheelbase
• a must have for all track and race enthusiast
• each kit includes pair of 2 arms
• fits both front and rear axles
• compatible with all 996/997/987/981 models except GT4
$1,895.00
Make a selection
Front 24mm - 2 way adjustable
Rear 26mm - 2 way adjustable
Fits: turbo 3.6 (93-94), turbo 3.3 (91-92), turbo-look (91-94), not for tiptronic
General Fitment 911 1989-94
This kit is complete and includes a total of 8, 4 smaller and 4 larger for the rear control arms. Our weather sealed monoball cartridges are crafted in high carbon steel and 7075 t6 aircraft aluminum. They will positively locate the suspension arms so suspension motion is accurately repeated in every corner. Sold as a set of 8. 1 kit is necessary per car. Please note: noise may resonate inside the cabin during street use.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Front 24mm (3 way adjustable) rear 19.5mm (3 way adjustable)
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,126.40
Make a selection
Front 26mm - 3-way adjustable rear 24mm - 4-way adjustable
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Front 26mm - not adjustable rear 22mm - 2-way adjustable
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Front 25mm (3 way adjustable) rear 24mm (3 way adjustable)
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,126.40
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|